On the energy leakage of discrete wavelet transform

The energy leakage is an inherent deficiency of discrete wavelet transform (DWT) which is often ignored by researchers and practitioners. In this paper, a systematic investigation into the energy leakage is reported. The DWT is briefly introduced first, and then the energy leakage phenomenon is described using a numerical example as an illustration and its effect on the DWT results is discussed. Focusing on the Daubechies wavelet functions, the band overlap between the quadrature mirror analysis filters was studied and the results reveal that there is an unavoidable tradeoff between the band overlap degree and the time resolution for the DWT. The dependency of the energy leakage to the wavelet function order was studied by using a criterion defined to evaluate the severity of the energy leakage. In addition, a method based on resampling technique was proposed to relieve the effects of the energy leakage. The effectiveness of the proposed method has been validated by numerical simulation study and experimental study

Effects of bearing clearance on the chatter stability of milling process

In the present study, the influences of the bearing clearance, which is a common fault for machines, to the chatter stability of milling process are examined by using numerical simulation method. The results reveal that the presence of bearing clearance could make the milling process easier to enter the status of chatter instability and can shift the chatter frequency. In addition, the spectra analysis to vibration signals obtained under the instable milling processes show that the presence of bearing clearance could introduce more frequency components to the vibration responses but, however, under both the stable and instable milling processes, the generated frequency components will not violate the ideal spectra structures of the vibration responses of the milling process, which are usually characterized by the tooth passing frequency and its associated higher harmonics for the stable milling process and by the complex coupling of the tooth passing frequency and the chatter frequency for the instable milling process. This implies that, even under the case with bearing clearance fault, the stability of the milling process can still be determined by viewing the frequency spectra of the vibration responses. Moreover, the phenomena of the chatter frequency shift and the generation of more components provide potential ways to detect the bearing clearance in machines. (C) 2010 Elsevier Ltd. All rights reserved

Assessment of boundary-element method for modelling a free-floating sloped wave energy device. Part 2: experimental validation

The boundary-element method has been widely used as a design tool in the offshore and ship building industry for more than 30 years. Its application to wave energy conversion is, however, more recent. This is the second of two papers on a comparison of numerical and physical modelling of a free-floating sloped wave energy converter. In the first paper the numerical modelling formulation for the power take-off mechanism was derived using the boundary-element method package WAMIT. It was verified against numerical benchmark data. In this paper, the outcome of the modelling of the whole device is compared with experimental measurements obtained from model testing in a wave tank. The agreement is generally good

Development and preliminary testing of the new five-level version of EQ-5D (EQ-5D-5L)

This article introduces the new 5-level EQ-5D (EQ-5D-5L) health status measure. EQ-5D currently measures health using three levels of severity in five dimensions. A EuroQol Group task force was established to find ways of improving the instrument's sensitivity and reducing ceiling effects by increasing the number of severity levels. The study was performed in the United Kingdom and Spain. Severity labels for 5 levels in each dimension were identified using response scaling. Focus groups were used to investigate the face and content validity of the new versions, including hypothetical health states generated from those versions. Selecting labels at approximately the 25th, 50th, and 75th centiles produced two alternative 5-level versions. Focus group work showed a slight preference for the wording 'slight-moderate-severe' problems, with anchors of 'no problems' and 'unable to do' in the EQ-5D functional dimensions. Similar wording was used in the Pain/Discomfort and Anxiety/Depression dimensions. Hypothetical health states were well understood though participants stressed the need for the internal coherence of health states. A 5-level version of the EQ-5D has been developed by the EuroQol Group. Further testing is required to determine whether the new version improves sensitivity and reduces ceiling effects

Clinical targets for continuous glucose monitoring data interpretation : recommendations from the international consensus on time in range

Improvements in sensor accuracy, greater convenience and ease of use, and expanding reimbursement have led to growing adoption of continuous glucose monitoring (CGM). However, successful utilization of CGM technology in routine clinical practice remains relatively low. This may be due in part to the lack of clear and agreed-upon glycemic targets that both diabetes teams and people with diabetes can work toward. Although unified recommendations for use of key CGM metrics have been established in three separate peer-reviewed articles, formal adoption by diabetes professional organizations and guidance in the practical application of these metrics in clinical practice have been lacking. In February 2019, the Advanced Technologies & Treatments for Diabetes (ATTD) Congress convened an international panel of physicians, researchers, and individuals with diabetes who are expert in CGM technologies to address this issue. This article summarizes the ATTD consensus recommendations for relevant aspects of CGM data utilization and reporting among the various diabetes populations